RacerX Fabrication FR-S / BRZ / GT86 FRONT LOWER CONTROL ARMS Item # 020403
The Racer X Fabrication front lower control arms for the 2013+ Scion FR-S / Subaru BRZ / Toyota GT86 were designed to reduce weight and increase rigidity. The OEM front lower control arms have been known to bend and flex under load. The Racer X control arms eliminate this by using light weight 4130 Chromoly tubing and chromoly rod ends. The control arms were designed in CAD from the OEM model to match and follow the small angle that is located at the rear of the control arm. The arms allow for on vehicle adjustment of camber and caster and are zinc plated black for corrosion resistance.
Racer X Fabrication / Tatis Motorsports, LLC is NOT responsible for damage to control arms from ball joints being installed incorrectly. Ball joint installation / removal REQUIRES specialized tooling, please make sure your installer / service center is properly equipped to handle this process.
*Not for use with extended ball joints.
- (2) Front lower 4130 chromoly control arms
- (4) 1"-12 Bung nut adjuster
- (4) 1"-12 RH jam nut
- (4) 3/4"-16 LH rod end
- (4) 3/4"-16 LH jam nut
- (8) Aluminum bushings
- 2013+ Scion FR-S
- 2013+ Subaru BRZ
- 2013+ Toyota GT86
- Install Time: 1 to 2 hours
- Alignment recommended after installation.
- INSTALLATION GUIDE
- PROPER CAMBER ADJUSTMENT
WARNING: Cancer and Reproductive Harm
OFF ROAD USE ONLY
WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road.
We Also Recommend
Energy Suspension Sway Bar Bushing Set - (Subaru BRZ, Scion FR-S) 8.5138G
Whiteline GearBox Positive Shift Kit - (Subaru BRZ, Scion FR-S, Toyota 86) KDT926